|
|
Product ID: A8012
Flexible Connector - Flexible Carrier
|
Flexible carrier A8012
Click here for details.
Detail Specification |
Features:
- Material: Galvanized steel sheet, supported by inner stainless steel plate.
- Fastening: Flanges are welded to both ends of the flexible conduit to insure electricity continuity.
- Length:
- Fixed at the middle: Total length = stroke / 2 + 4 times bending radius + 50 mm.
- Fixed at single side: Total length = stroke + 4 times bending radius + 50mm.
- Size selection: To determine interior size, a 30 ~ 40% allowance should be added to the outside diameter of the enclosed cables to prevent binding.
- Bending: It's better to choose by 8-10 times of the outside diameter of total enclosed cables for selecting the bending radius.
- Fitting: The type of A, B, S, as picture on request.
- Security guarantee should be in the limit of 60 ~ 70% of capacities, out of this limitation, it would be artificial improper disposal.
- Suggest to install the support holder to extend the life of using.
- IP50.
|
| Type |
Outside W x H
(mm) |
Inside W x H
(mm) |
Min. banding radius กำ10%
(mm) |
| I |
50 x 30 |
43 x 23 |
100 |
| II |
80 x 45 |
73 x 38 |
120 |
| III |
110 x 60 |
102 x 52 |
140 |
| IV |
130 x 65 |
122 x 57 |
150 |
| VI |
150 x 70 |
142 x 62 |
170 |
| VII |
170 x 80 |
162 x 72 |
200 |
|
Ordering information:
Minimum Order: Negotiable
- FOB: Taichung, Taiwan
TEL: 886-4-22780100
FAX: 886-4-22787100
|
|
|
|
Copyright (C) Bliss Yih Enterprise Co., Ltd.. All rights reserved.
Power by All Products Online Corp.
Commerce Site
.
|
| |
;)
